7013CEGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle

LET OUR 7013CEGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle EXPERTS China JCB Hydraulic Final Drive Motor Supplier GET YOU 55x90x23 THE PARTS YOU NEED.

Brand Name:SKF
Model Number:7013CEGA/HCP4A
Outer Diameter (mm):90
Dynamic Load Rating (Cr):144,000
Lubrication Groove Location (A):11.500
Material:52100 Chrome steel,
Mis-alignment Angle (a deg.):4
Static Load Rating (Cor):721,000
Max. housing corner radius, or 45 deg. chamfer (ch):1.100
Outer Dia (D):90.0000

Product Details

Outer Diameter (mm)90
Dynamic Load Rating (Cr)144,000
Lubrication Groove Location (A)11.500
Material52100 Chrome steel,
Mis-alignment Angle (a deg.)4
Static Load Rating (Cor)721,000
Max. housing corner radius, or 45 deg. chamfer (ch)1.100
Outer Dia (D)90.0000
Size (mm)55x90x23
Weight (g)645.00
Bore Diameter (mm)55
Spherical Diameter (dk or Dk)82.000
Width (B)23.0000
Bearing numberGAC55S
Width (mm)23
Bore Dia (d)55.0000
Max. shaft corner radius, or 45 deg. chamfer (ch1)1.100
Spherical Center Location (S)5
Outer Width (Bo)20.0000
Bearing Type - steel-on-steelsteelonsteel
View more

Company Profile

China JCB Hydraulic Final Drive Motor Supplier
Phone +1-578-517-2841
View more

Related News

  • How do I choose a hydraulic pump?
    Engineering Essentials: Fundamentals of Hydraulic PumpsA hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy. It generates flow with enough power to overcome pressure  Which Hydraulic Pump is Right for...
  • How do I know if my hydraulic pump is bad?
    4 Signs That You Need to Repair or Replace Your HydraulicAs soon as you see liquids anywhere inside the pump, other than in the tubes where they belong, you can be sure that there is something wrong with the pump. It  The Most Definitive Test...
  • What happens if you put engine oil in hydraulic?
    Is it possible to use motor oil in a hydraulic system? - QuoraFeb 29, 2016 — No you cannot use Motor Oil in a Hydraulic System. Motor Oil runs at a much higher temperature and Hydraulic Oil starts to fail at around 45c. Once you run Hydraulic Oil...

    • Recommended Products

    All Products Contact Now
    Contact Us