7014CE/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle

With over 10170 133.35x196.85x46.038 full-service stores, our 7014CE/P4ADBA SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,7000 Series,15 Degree Contact Angle inventory is extensive and our 10.77 Hz Characteristic rolling element frequency, BSF parts are priced right. within 24 hours. This China JCB Hydraulic Final Drive Motor Supplier helps you maximize your productivity by saving time and your hard-earned dollars.

Brand Name:SKF
Model Number:7014CE/P4ADBA
Manufacturer Name:NTN
Characteristic rolling element frequency, BSF:10.77 Hz
db:143 mm
Width (mm):46,038
Nlim (grease):1,700 rpm
Size (mm):133.35x196.85x46.038
Basic dynamic load rating (C):310 kN
a:6,3 mm

Product Details

Manufacturer NameNTN
Characteristic rolling element frequency, BSF10.77 Hz
db143 mm
Width (mm)46,038
Nlim (grease)1,700 rpm
Size (mm)133.35x196.85x46.038
Basic dynamic load rating (C)310 kN
a6,3 mm
Bearing number4T-67390/67322
Product GroupB04334
d1165.5 mm
Da180 mm
Mass4.63 kg
T46,038 mm
(Grease) Lubrication Speed1 700 r/min
Max operating temperature, Tmax120 °C
ra max.3,5 mm
Weight4,63 Kg
Y21.74
D196,85 mm
View more

Company Profile

China JCB Hydraulic Final Drive Motor Supplier
Phone +1-578-517-2841
View more

Related News

  • How do I choose a hydraulic pump?
    Engineering Essentials: Fundamentals of Hydraulic PumpsA hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy. It generates flow with enough power to overcome pressure  Which Hydraulic Pump is Right for...
  • How do I know if my hydraulic pump is bad?
    4 Signs That You Need to Repair or Replace Your HydraulicAs soon as you see liquids anywhere inside the pump, other than in the tubes where they belong, you can be sure that there is something wrong with the pump. It  The Most Definitive Test...
  • What happens if you put engine oil in hydraulic?
    Is it possible to use motor oil in a hydraulic system? - QuoraFeb 29, 2016 — No you cannot use Motor Oil in a Hydraulic System. Motor Oil runs at a much higher temperature and Hydraulic Oil starts to fail at around 45c. Once you run Hydraulic Oil...

    • Recommended Products

    All Products Contact Now
    Contact Us