71807CDGA/HCP4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,15 Degree Contact Angle

Offer High Quality Stamped Steel Cage Type Brand 71807CDGA/HCP4 SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71800 Series,15 Degree Contact Angle .Contact Us Online to Get Best China JCB Hydraulic Final Drive Motor Supplier Quote.

Brand Name:SKF
Model Number:71807CDGA/HCP4
Cage Type:Stamped Steel
Cone Part Number:67780V
da - Cone Frontface Backing Diameter:7.05 in
B - Cone Width:1.875 in
d:6.5 in
Series:67700
a - Effective Center Location4:0.19 in
G2 - Heat Generation Factor (Rib-Roller End):122.6

Product Details

Cage TypeStamped Steel
Cone Part Number67780V
da - Cone Frontface Backing Diameter7.05 in
B - Cone Width1.875 in
d6.5 in
Series67700
a - Effective Center Location40.19 in
G2 - Heat Generation Factor (Rib-Roller End)122.6
C1 - Dynamic Radial Rating (1 million revolutions)6108000 lbf
Aa - Cage-Cone Backface Clearance0.17 in
Cg - Geometry Factor0.121
Ca90 - Dynamic Thrust Rating (90 million revolutions)721100 lbf
G1 - Heat Generation Factor (Roller-Raceway)622.3
C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1188000 lbf
Design UnitsImperial
Ab - Cage-Cone Frontface Clearance0.11 in
db - Cone Backface Backing Diameter7.28 in
C0 - Static Radial Rating175000 lbf
C90 - Dynamic Radial Rating (90 million revolutions)528000 lbf
C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)248700 lbf
View more

Company Profile

China JCB Hydraulic Final Drive Motor Supplier
Phone +1-578-517-2841
View more

Related News

  • How do I choose a hydraulic pump?
    Engineering Essentials: Fundamentals of Hydraulic PumpsA hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy. It generates flow with enough power to overcome pressure  Which Hydraulic Pump is Right for...
  • How do I know if my hydraulic pump is bad?
    4 Signs That You Need to Repair or Replace Your HydraulicAs soon as you see liquids anywhere inside the pump, other than in the tubes where they belong, you can be sure that there is something wrong with the pump. It  The Most Definitive Test...
  • What happens if you put engine oil in hydraulic?
    Is it possible to use motor oil in a hydraulic system? - QuoraFeb 29, 2016 — No you cannot use Motor Oil in a Hydraulic System. Motor Oil runs at a much higher temperature and Hydraulic Oil starts to fail at around 45c. Once you run Hydraulic Oil...

    • Recommended Products

    All Products Contact Now
    Contact Us