71902CDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle

71902CDGA/HCP4A SKF Super Precision,Super Precision Bearings,Super Precision Angular Contact,71900 Series,15 Degree Contact Angle with easy-to-use parts graphics, giving you the ability China JCB Hydraulic Final Drive Motor Supplier to =Bearings1_Inside Ri Inside Ring Width B check parts availability, Super Precision Bearing pricing, 93.7 mm Total Height H2 examine remanufactured options.

Brand Name:SKF
Model Number:71902CDGA/HCP4A
Inside Ring Width B:=Bearings1_Inside Ri
Housing Style:Two-Bolt Pillow Bloc
Total Height H2:93.7 mm
Bolt Hole Width N:14.3 mm
Bolt Hole Length N1:24.6 mm
Bearing Number:G1106KPPB2
Bolt Hole Spacing J:130.2 mm
Total Length L:166.7 mm

Product Details

Inside Ring Width B=Bearings1_Inside Ri
Housing StyleTwo-Bolt Pillow Bloc
Total Height H293.7 mm
Bolt Hole Width N14.3 mm
Bolt Hole Length N124.6 mm
Bearing NumberG1106KPPB2
Bolt Hole Spacing J130.2 mm
Total Length L166.7 mm
Shaft Size d1 3/8 in
Inside Ring Outside Diameter0.673 in
SeriesIndustrial
Dynamic Load Rating6400 lbf
Dimension T0.921 in
Center of Bearing from End S18.7 mm
Bearing TypeBall Bearing
Foot Height H116.7 mm
Seal TypeTri-Ply Seal
Base to Center Height H46.04 mm
Weight4.167 lb
Dimension B12.016 in
View more

Company Profile

China JCB Hydraulic Final Drive Motor Supplier
Phone +1-578-517-2841
View more

Related News

  • How do I choose a hydraulic pump?
    Engineering Essentials: Fundamentals of Hydraulic PumpsA hydraulic pump is a mechanical device that converts mechanical power into hydraulic energy. It generates flow with enough power to overcome pressure  Which Hydraulic Pump is Right for...
  • How do I know if my hydraulic pump is bad?
    4 Signs That You Need to Repair or Replace Your HydraulicAs soon as you see liquids anywhere inside the pump, other than in the tubes where they belong, you can be sure that there is something wrong with the pump. It  The Most Definitive Test...
  • What happens if you put engine oil in hydraulic?
    Is it possible to use motor oil in a hydraulic system? - QuoraFeb 29, 2016 — No you cannot use Motor Oil in a Hydraulic System. Motor Oil runs at a much higher temperature and Hydraulic Oil starts to fail at around 45c. Once you run Hydraulic Oil...

    • Recommended Products

    All Products Contact Now
    Contact Us